An error occurred while creating the ftp client: Ports must be in range [1024,65535]

Questions about Cobian Reflector
User avatar
cobian
Site Admin
Posts: 524
Joined: 31 Oct 2020, 01:25
Location: Sweden
Contact:

Re: An error occurred while creating the ftp client: Ports must be in range [1024,65535]

Post by cobian »

To everyone having this error: are you sure that the min and max port aren't set to 0?
--
Luis Cobian
Cobian Backup's creator
DN1000
Posts: 5
Joined: 07 Oct 2021, 05:44

Re: An error occurred while creating the ftp client: Ports must be in range [1024,65535]

Post by DN1000 »

Yes the min & max ports are 0 but I can' modify them as attached, they are greyed out.
Attachments
Screenshot 2021-10-12 092502.png
Screenshot 2021-10-12 092502.png (57.79 KiB) Viewed 270 times
User avatar
cobian
Site Admin
Posts: 524
Joined: 31 Oct 2020, 01:25
Location: Sweden
Contact:

Re: An error occurred while creating the ftp client: Ports must be in range [1024,65535]

Post by cobian »

You need to make te connection active in order change those values. Or wait until 0.9.18 which fixes this. It will be out tomorrow.
--
Luis Cobian
Cobian Backup's creator
DN1000
Posts: 5
Joined: 07 Oct 2021, 05:44

Re: An error occurred while creating the ftp client: Ports must be in range [1024,65535]

Post by DN1000 »

I just loaded 0.9.18 and same port issue happened, List file attached.
Attachments
ept_transfer.7z
(2.54 KiB) Downloaded 14 times
User avatar
cobian
Site Admin
Posts: 524
Joined: 31 Oct 2020, 01:25
Location: Sweden
Contact:

Re: An error occurred while creating the ftp client: Ports must be in range [1024,65535]

Post by cobian »

But I see that you have your ports set to 29 and 1000 (?).
--
Luis Cobian
Cobian Backup's creator
DN1000
Posts: 5
Joined: 07 Oct 2021, 05:44

Re: An error occurred while creating the ftp client: Ports must be in range [1024,65535]

Post by DN1000 »

I put the min & max port numbers at 1024/65535 and it worked, as I'm using port 21 I would have thought the minimum port would of had to be lower than 21 !!
User avatar
cobian
Site Admin
Posts: 524
Joined: 31 Oct 2020, 01:25
Location: Sweden
Contact:

Re: An error occurred while creating the ftp client: Ports must be in range [1024,65535]

Post by cobian »

21 is the connection port (control port). The min and max port is the data port. An ftp connection uses 2 ports for transfers.
--
Luis Cobian
Cobian Backup's creator
chatoarango
Posts: 6
Joined: 07 Oct 2021, 02:33

Re: An error occurred while creating the ftp client: Ports must be in range [1024,65535]

Post by chatoarango »

Luis confirmo que estos errores ya están solucionados en la versión 0.9.20 BETA
User avatar
cobian
Site Admin
Posts: 524
Joined: 31 Oct 2020, 01:25
Location: Sweden
Contact:

Re: An error occurred while creating the ftp client: Ports must be in range [1024,65535]

Post by cobian »

Gracias.
--
Luis Cobian
Cobian Backup's creator
biptvcanarias
Posts: 5
Joined: 05 Oct 2021, 15:00

Re: An error occurred while creating the ftp client: Ports must be in range [1024,65535]

Post by biptvcanarias »

Great already everything works for me, only one detail the application did not warn me that there was a new update.
Otherwise everything great.
CONGRATULATIONS
Post Reply