Hi
At the installation and In the application when checking "service control", I have several error (Cf. printscreen)
"Couldn't start the service: %1 n’est pas une application Win32 valide."
PC on W10
Installation made as a service
Couldn't start the service: %1 n’est pas une application Win32 valide
Couldn't start the service: %1 n’est pas une application Win32 valide
- Attachments
-
- Screen Shot 10-04-21 at 04.51 PM.JPG (121.54 KiB) Viewed 9126 times
Re: Couldn't start the service: %1 n’est pas une application Win32 valide
Thank you for your report . Does this happen when starting the main service or the VSC requester? Does this happens with the latest version?
--
Luis Cobian
Cobian Backup's creator
Luis Cobian
Cobian Backup's creator
Re: Couldn't start the service: %1 n’est pas une application Win32 valide
It's happen with the version 0.9.07.
I'm not sure to understand what the VSC requester is but it was append :
- during the installation phase,
- when in tools menu i've click on "service and application control" on the information page
- when I select in this window "service" page, and i try to start "control the main service" and "control the volume shadow copy register"
I'm not sure to understand what the VSC requester is but it was append :
- during the installation phase,
- when in tools menu i've click on "service and application control" on the information page
- when I select in this window "service" page, and i try to start "control the main service" and "control the volume shadow copy register"
Re: Couldn't start the service: %1 n’est pas une application Win32 valide
Sounds like a corrupted installation. Download the latest version and see if it works.
--
Luis Cobian
Cobian Backup's creator
Luis Cobian
Cobian Backup's creator
Re: Couldn't start the service: %1 n’est pas une application Win32 valide
I've download the version availible this day and restart the install.
Here is the display during installation:
Démarrage de l'installation...Désinstallation de l'instance existante du programme...
En attente de la fin du programme de désinstallation...
L'ancienne instance a été désinstallée.
Création des icônes du menu démarrer...
Les icônes du menu de démarrage ont été créées.
Vérification et installation des packages d'exécution Visual C++ redistribuables si nécessaire...
Les packages redistribuables ont été installés avec succès.
Installation du demandeur de cliché instantané de volume...
Le demandeur de cliché instantané de volume a été installé avec succès.
Démarrage du demandeur de cliché instantané de volume...
Impossible de démarrer le demandeur de cliché instantané de volume : %1 n’est pas une application Win32 valide.
Installation du service principal...
Le service principal a été installé avec succès.
Démarrage du service principal...
Le service principal n'a pas pu être démarré : %1 n’est pas une application Win32 valide.
Démarrage de l'interface utilisateur...
L'interface utilisateur a été démarrée.
Création de la clé de registre de démarrage automatique pour l'interface utilisateur...
La clé de registre de démarrage automatique pour l'interface utilisateur a été définie avec succès.
Enregistrement du programme de désinstallation....
Enregistrement de l'installation...
L'installation a été enregistrée avec succès.
L'installation est terminée mais il y a des erreurs. Veuillez consulter l'onglet journal.
Here is the display during installation:
Démarrage de l'installation...Désinstallation de l'instance existante du programme...
En attente de la fin du programme de désinstallation...
L'ancienne instance a été désinstallée.
Création des icônes du menu démarrer...
Les icônes du menu de démarrage ont été créées.
Vérification et installation des packages d'exécution Visual C++ redistribuables si nécessaire...
Les packages redistribuables ont été installés avec succès.
Installation du demandeur de cliché instantané de volume...
Le demandeur de cliché instantané de volume a été installé avec succès.
Démarrage du demandeur de cliché instantané de volume...
Impossible de démarrer le demandeur de cliché instantané de volume : %1 n’est pas une application Win32 valide.
Installation du service principal...
Le service principal a été installé avec succès.
Démarrage du service principal...
Le service principal n'a pas pu être démarré : %1 n’est pas une application Win32 valide.
Démarrage de l'interface utilisateur...
L'interface utilisateur a été démarrée.
Création de la clé de registre de démarrage automatique pour l'interface utilisateur...
La clé de registre de démarrage automatique pour l'interface utilisateur a été définie avec succès.
Enregistrement du programme de désinstallation....
Enregistrement de l'installation...
L'installation a été enregistrée avec succès.
L'installation est terminée mais il y a des erreurs. Veuillez consulter l'onglet journal.
Re: Couldn't start the service: %1 n’est pas une application Win32 valide
If you try to start the service from the Application abs Service control, do you get the same error?
--
Luis Cobian
Cobian Backup's creator
Luis Cobian
Cobian Backup's creator
Re: Couldn't start the service: %1 n’est pas une application Win32 valide
Yes
Starting the service...
Couldn't start the service: %1 n’est pas une application Win32 valide.
Starting the service...
Couldn't start the service: %1 n’est pas une application Win32 valide.
Re: Couldn't start the service: %1 n’est pas une application Win32 valide
Could you check the Event Viewer and see if you find some more info there?
Also, can you start the service using the normal way (Control-Panel/Service)?
Also, can you start the service using the normal way (Control-Panel/Service)?
--
Luis Cobian
Cobian Backup's creator
Luis Cobian
Cobian Backup's creator
Re: Couldn't start the service: %1 n’est pas une application Win32 valide
In the event viewer I can see :
- Le service Cobian Reflector moteur n’a pas pu démarrer en raison de l’erreur :
Cobian Reflector moteur n’est pas une application Win32 valide.
-Volume Windows (\Device\HarddiskVolumeShadowCopy60) est sain. Aucune action n’est nécessaire.
For the first message there is also
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2021-10-29T13:10:25.861879500Z" />
<EventRecordID>126372</EventRecordID>
<Correlation />
<Execution ProcessID="1116" ThreadID="6324" />
<Channel>System</Channel>
<Computer>TableVente1</Computer>
<Security />
</System>
- <EventData>
<Data Name="param1">Cobian Reflector moteur</Data>
<Data Name="param2">%%193</Data>
<Binary>43006F006200690061006E005200650066006C006500630074006F00720053006500720076006900630065000000</Binary>
</EventData>
</Event>
When I try to start manualy the service "Cobian reflector moteur" I have the message "Windows n'a pas pu démarrer le service Cobian reflector moteur sur ordinateur local" erreur 193: 0xc1
- Le service Cobian Reflector moteur n’a pas pu démarrer en raison de l’erreur :
Cobian Reflector moteur n’est pas une application Win32 valide.
-Volume Windows (\Device\HarddiskVolumeShadowCopy60) est sain. Aucune action n’est nécessaire.
For the first message there is also
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2021-10-29T13:10:25.861879500Z" />
<EventRecordID>126372</EventRecordID>
<Correlation />
<Execution ProcessID="1116" ThreadID="6324" />
<Channel>System</Channel>
<Computer>TableVente1</Computer>
<Security />
</System>
- <EventData>
<Data Name="param1">Cobian Reflector moteur</Data>
<Data Name="param2">%%193</Data>
<Binary>43006F006200690061006E005200650066006C006500630074006F00720053006500720076006900630065000000</Binary>
</EventData>
</Event>
When I try to start manualy the service "Cobian reflector moteur" I have the message "Windows n'a pas pu démarrer le service Cobian reflector moteur sur ordinateur local" erreur 193: 0xc1
Re: Couldn't start the service: %1 n’est pas une application Win32 valide
Thanks. What is the name of the directory where the program is installed? I have seen this problem 4 times and every time is on a french language system.. maybe a coincidence, but...
--
Luis Cobian
Cobian Backup's creator
Luis Cobian
Cobian Backup's creator