Drag and Drop problem

Questions about Cobian Backup 11 (Gravity)
Post Reply
dakosimo
Posts: 2
Joined: 24 May 2021, 13:58

Drag and Drop problem

Post by dakosimo »

I installed Cobian Gravity 11 on Windows 10 64 bit computer.

All works good.

But I have one problem: Drag and drop from Explorer do not work ! When I drag folder or file from Explorer to Source area, I can see tiny + square and when I release left click, nothing happens !?

Just to mention, I used Cobian on Windows XP 32 bit and drag and drop works fine.

If anybody knows solution, please help.

Thank you in advance.

Simo.
User avatar
cobian
Site Admin
Posts: 4492
Joined: 31 Oct 2020, 01:25
Location: Sweden
Contact:

Re: Drag and Drop problem

Post by cobian »

Perhaps the interface (or explorer) is running in elevated mode? Both explorer and the interface must run under the same user to be able to use drag'n'drop.
--
Luis Cobian
Cobian Backup's creator
dakosimo
Posts: 2
Joined: 24 May 2021, 13:58

Re: Drag and Drop problem

Post by dakosimo »

Neither is running in elevated mode.
Today I discovered this situation:
On some place exists workgroup network with mixed computers, several with XP SP3, one with Windows 7 32 bit, and two Windows 10 64 computers.
Drag and drop works on all XP, on Windows 7 and on one Windows 10 64 bit ! But on another Windows 10 64 bit drag and drop do not work !? Sorry I did not checked Windows 10 builds.

Thank you and best regards.

Simo.
User avatar
cobian
Site Admin
Posts: 4492
Joined: 31 Oct 2020, 01:25
Location: Sweden
Contact:

Re: Drag and Drop problem

Post by cobian »

Running on 64bits Windows 10 here. Works OK. No idea what could be causing your problem. :|
--
Luis Cobian
Cobian Backup's creator
Post Reply